How could i put on a Toyota Camery door handle?

My front door handle fell of my new Toyota Camery, so i went out to the store and bought a new one. But the only problem is that I don't know how to put it on! Help is appreciated.How could i put on a Toyota Camery door handle?if it is the outdoor handle:



there are 3 or 4 screws on the inside door panel, 2 @ the bottom and 1 in the handle you use to close the door and one in the center of in the inside door handle. make sure you have removed all of the screws, and then you should be able to fit your fingers between the door 'panel' and the door 'body'. starting at the bottom pop loose all of the clips that hold on the door panel. by this time you should be able to remove the door handle. when you pull the door handle you have to remove the manipulating rod (rod in the center of the handle), now the inside door handle should be off, now finish popping clips around the door handle, and you should be able to pull it back far enough to see the mounts for the outside door handle, there should be 2 nuts remove those and pull off the manipulating rod clip for the outer door handle. then put on new handle and do everything in reverse to put the door back together.



inside handle:

take out screw in center of inside door handle cup, pull out door handle cup by pivoting it out at the front end, once out far enough remove minupulating rod 'clip' (leave th rod remove the clip) then put on new handle :)

(make sure to screw everything back on)

hope this helps

pizza coupons